Permanent Variables

Basics
Home
Sensor Values
Version

Sensor History
All Sensors
Humidities
Temperatures
DC Voltages
AC Voltages

Pin History
Pulse Counts
Kilowatt Hours
RPM
Water (gpm)
Water (lpm)

Exports
XML

Output Control
I/O Pin Control

Sensors by Name
Named Periods

Setup and Configuration
Database
Email SMTP Setup
Data Map
LOGGER IoT Setup
Security
Network Setup
Pulse Ratios
Sensor Configuration
Settings
Set Time (manually)
Temperature Sensors
Time History
Update Firmware
 
System Status
WiFi Name:ElectricPanel
Time since boot: 21 days 6:36:45
Number of crashes and hangs:27
Number of reboots:79
Last reboot cause:Hardware Watchdog
Connected to: KudosDen
Local IP address: 192.168.12.187
Enabled Sensors:37
Network Status
Running as:Access Point AND Server
After Reboot run as:Access Point AND Server
 
Units
Temperature Units
Differential Pressure Units
Guage vs Differential measure
PRESSURE_RANGE
The range is the max value of the differential pressure sensor times 10. For example the DLVR-L05D range of 5 should be entered as 50.
Permanent Parameters
PERM_VERSION1  
PERM_SIZE732  
SSID_NAME
SSID_PASSWORD
CONFIG_MODE3  
MINIMUM_PULSE_LENGTH
Deep Sleep after each sample
Pulse counting will not work if turned ON.
 
Modbus Address
WATTNODE_METER
Set the address to 0 to turn off the Modbus. A reboot is required to start using the new modbus address.

79 reboots, (of which 27 were unexpected) last reboot cause: Hardware Watchdog
System booted at: 4-April-2024 3:36:28 GMT
Time since boot: 21 days 6:36:45
LOGGER Copyright (c) 2015-2021 by Dragonnorth Group
portions Copyright (c) 2014-2021 by Michael Newman (DBA Dragonnorth Group)
all rights reserved
LOGGER version 1(88)-210 Processor module Serial Number: 3017
built with ARDUINO version 10813